近期,中科蓝讯推出面向智能手表市场的 BT8918 系列蓝牙 Soc。BT8918 系列采用最近比较流行的 RISC-V( 32 位 ) 开源内核架构+国产 RT-Thread 操作系统,高集成度集成包括 MCU & DSP,同时支持 BLE 以及经典蓝牙,单芯片完成整个手表方案。BT8918 主频最高 120MHz,支持 BT5.2,最大内置 4MB FLASH 空间,配套自主研发的 GUI,支持 240*280 内分辨率的 SPI 接口显示。双模蓝牙,除 BLE 数据传输外,BT 可实现蓝牙通话功能。带有的 DSP 可做音频相关的处理。

图 1 : 中科蓝讯 BT8918 应用产品图
二、BT8918 主要特点
CPU and Flexible IO
32bit High performance CPU with DSP instruction
Program memory: internal 16M bit flash
Flexible GPIO pins with Programmable pull-up and pull-down resistors;
Support GPIO wakeup or interrupt;
Bluetooth Radio
Compliant to Bluetooth 5.2 and BLE specification (QDID: 166851);
TX output power MAX +9dBm;
RX Sensitivity with -94dBm @2M EDR;
Support TWS communication with balance-efficiency Power consumption;
Support TWS Master-slave switch;
Audio Interface
High performance stereo DAC with 98dB SNR, support single end mode or differential mode;
One channel high performance ADC with 90dB SNR;
One channel MIC amplifier input;
Support flexible audio EQ adjust;
Support Sample rate 8, 11.025, 12, 16, 22.05, 32, 44.1 and 48KHz;
Four channel Stereo Analog MUX;
Package
QFN40;
Temperature
Operating temperature: -40℃ to +85℃;
图 2 : 中科蓝讯 BT8918 产品架构
三、实际应用框架

图 3 : 中科蓝讯 BT8918 手表产品应用架构图
① 显示界面:支持 SPI 接口显示屏,最高支持 240* 280 分辨率显示,搭配中科蓝讯自主设计的 GUI,能够更简便的开发设计手表手环产品的显示界面,帧率可达 50fps
② 双模蓝牙:兼容 Bluetooth 5. 2 and BLE Specification ( QDID: 166851),BT 经典蓝牙的加入,在手表端可轻松实现蓝牙音频的传输、蓝牙接打电话等功能;
③ 低功耗:BLE/BT 双连接情况下,功耗可控制在 250μA 以下,大大提高整机的续航
④ 丰富的外设接口:I2C、SPI、UART、I2S,满足各种传感器或其他外设的连接,同时还有 IR 红外接口,可支持红外遥控功能
⑤ 存储部分:内置 FLASH 最大支持 4MB,BT8918D 支持外接 SPI FLASH;同时 BT8918 系列还支持 SD 卡的存储拓展,存储多媒体资料;支持 USB2.0
⑥ 内置 DSP:支持 AAC、mSBC 高质量音频格式解码,同时带有 ENC 降噪算法
四、参考资料
中科蓝讯 BT8918 介绍:http://www.bluetrum.com/product/bt8918b.html
如需更多介绍资料或实际 Demo,可联系 kyran.peng@wpi-group.com
评论